The Best Gheenoe Grab Bar Guide

Gheenoes are built with a specific purpose to be a cross between a canoe and a skiff. The Gheenoe grab bar is also built for the needs and specifications of Gheenoe owners. In this article, we’ll cover the best Gheenoe grab bar options. Some of the topics to be covered are mounting options, coating options, dimensions, cost, and accessories.

What to look for in a Gheenoe Grab Bar

Gheenoe grab bar mounting

The two main options are floor mount or side mount. The floor mount is for horizontal surfaces and the side mount has bracketry turned 90 degrees for mounting on vertical surfaces. The side mounting option is popular when attaching the grab bar to a console or cooler.

Gheenoe grab bar coating and finishes

Powder coating and anodizing are the choices for grab bar surface finishes. Anodizing is going to be the longer lasting option but also the more expensive coating as well. A powder coat still has very good durability but it has to be laid on in a thicker coat and is more likely to chip than anodized aluminum.

Dimensions

36″ is a standard grab bar height, where you may find differing dimensions in the width. Some grab bars are 12″ wide while others are 14″ wide. The narrow options are for the gheenoes like the highsider that has a narrow hull. Of course, there are custom shops that can make a grab bar any size you want.

Cost

Gheenoe grab bar cost varies widely. We have found standard grab bars for about $80 and custom options up to $400. Your accessories, coating and dimensions will affect the cost. These grab bars can be fitted with electronic trays and storage tackle options and even a console

Gheenoe Grab Bar Accessories

Because the grab bars are typically made out of round tubing there are lots of accessories that can be mounted. The most common accessory is rod holders. You will also have electronics boxes, consoles and tackle trays added to the grab bar and cushions for comfortable leaning.

Removability

The last option is the ability to remove the grab bar, some grab bars are permanently fixed while others have a holder and locking pin system for easy removal and reinstallation.

Gheenoe grab bar manufacturers

Metalworx Gheenoe grab bar

Made in the USA from TIG welded aluminum, the width is 14” at center and height is 36”. Comes standard for LT10, LT25, and Classic Gheenoe. For Highsiders or other models a 90 degree mount can be added in the spec.

Great for stability while running and can add rod holders to it

Marine Dock & Boat 36″ Aluminum Handrail – Safety Grab Bar Rail with 2″ X 2″ X 6″ Vertical Angle Mounts for Gheenoe

The Marine Fiberglass Direct grab bar is a little bit narrow than other options and comes with 90 degree mounts for skinnier boat applications.

Custom Gheenoe removable grab bar

Custom gheenoe has taken it a step further with a removable grab bar These grabs bars are designed to be used on the LT 10, LT 25 or Classic model Gheenoes

They also have a floor mount version with power coating options These grabs are designed to allow a cooler to be placed in front of them to double as a seat for your passenger. You can also add a back rest cushion to the grab bar to help your passengers ride a little more comfortably as they lean back.

Custom Gheenoe floor mount grab bar

Fishmaster grab bar

The Fishmaster grab bars are made from 1.66 inch polished aluminum tubing and it comes with stainless hardware. The grab bar provides a place for fishermen to hold onto for extra stability. The grab bar quickly breaks down and stores away when not in use, plus it is only 79 dollars.

Gheenoe T Bar

A T bar is another choice for stable support on a Gheenoe. The T bar can be found in removable versions and powder-coated ones too. The T bar design is much simpler than a grab bar and has limited uses.

Mounting a Gheenoe grab bar

This installation video will help with mounting your grab bar

DIY Gheenoe grab bar

The guy in this video even made his homemade grab bar out of a Gorilla step ladder from Home Depot.

Conclusion

What do you look for in a grab bar? Would you add accessories to yours?

*As an amazon associate I may earn a small amount from the affiliate links above